Section2: Underst anding Your Phone
122 2J:E-m ail
䊳POP3: Sets the POP3 server details. (See “Changing the POP3 Server
Details” below.)
䊳SMTP: Sets the SMTP server details. (See “Changing the SMTP Server
Details” on page 123.)
䊳ReplyTo: Sets the e-mail address to which replys are sent.
䊳SenderName: Enters a sender name (up to 20 characters).
䊳Signature: Specifies whether a signature is used (ON) or not used
(OFF) when you send e-mail. If you select ON, you can enter a
signature (up to 256 characters).
䊳QuoteMessage : Specifies whether the sender, subject and text of a
received e-mail are quoted (ON) or not quoted (OFF) in your reply to
that e-mail.
7. Press .
Changingth e POP3 Server Details
As well as the settings specified during server setup, you can also change
the settings that were automatically set to the default values.
To change the POP3 server settings:
1. In the server modification screen, highlight POP3 and press .
2. Highlight the setting you want to change and press .
䊳ServerAddre ss: Changes the address of the POP3 server.
䊳Port#: Changes the port number for the POP3 server. (The default
number is 110.)
䊳Account: Changes the POP3 server account name.
䊳Password: Changes the POP3 server password.
䊳APOPAuth: Specifies whether APOP authentication is ON or OFF
when you receive e-mail.
䊳SizeLimit: Changes the size li mit for received mail. (The default size
limit is 10 KB.)
䊳MailCopy: Specifies whether rece ived e-mail is left on the server (ON)
or not (OFF). (The default setting is ON.)
Save
OK
OK