Section2: Underst anding Your Phone
50 2C:Set ting Your Phone’s Security
Accessing theSecurity Menu
You must enter your lock code to view the Security menu. The lock code
consists of four digits, and the default code is the last four digits of ESN
(see the Start Here Guide) before activating your phone, and then after,
the last four digits of your phone number.
To access the Security menu:
1. From the Standby mode, press the center of the cursor key to display
the top menu.
2. Select the Settings icon and press .
3. Highlight Security and press .
4. Enter lock code. (Press B to erase single digit.)
Digits are replaced by * on the display.
Tip: If you cannot recall your lock code, try u sing the last four digits of
eitheryour Soc ial Security number, ESN or PCS Phone Number or try
0000.If none of t hese work, call PCS Customer Service Solu tions at 1-
888-211-4PCS(4727).
Locking YourPhon e
When your phone is locked, you can only receive incoming calls or make
calls to 911, PCS Customer Service Solutions or special numbers. All
other functions of the phone are disabled.
To lock your phone:
1. From the Security menu, highlight LockPhone and press .
2. Depending on your preference, highlight either LockNow or On
Power-up, and press .
䊳LockNow to lock your phone immediately.
䊳OnPower-up to lock your phone every time the phone is turned on.
3. Press .
OK
OK
OK
OK
OK