Hobart Welding Products 210 MVP manual Specifications For 230 VAC, Specifications For 115 VAC

SECTION 4 − SPECIFICATIONS

4-1. Specifications For 230 VAC

Rated Welding	Amperage	Maximum Open-	Amperes Input at			Weight	Overall
			Rated Load Output
		Circuit Voltage		KVA	KW
Output	Range		230 V, 60 Hz,			W/ Gun	Dimensions
		DC
			Single-Phase
							Length: 19-1/2 in.
							(495 mm)
150 A @ 23 Volts	25 − 210	34	24	5.54	4.72	79 lb	Width: 10-5/8 in.
DC, 30% Duty Cycle						(36 kg)	(273 mm)
							Height: 12-3/8 in.
							(314 mm)
	Solid/	Flux Cored	Aluminum		Wire Feed Speed Range
Wire Type	Stainless
And Diameter
	.023 − .035 in.	.030 − .045 in.	.030 − .035 in.	70 − 750 IPM (1.8 − 19.0 m/min) At No Load
	(0.6 − 0.9 mm)	(0.8 − 1.2 mm)	(0.8 − 0.9 mm)	40 − 680 IPM (1.0 − 17.3 m/min) Feeding Wire

4-2. Specifications For 115 VAC

Rated Welding			Maximum	Amperes Input at			Weight	Overall
				Rated Load Out-
	Amperage Range		Open-Circuit		KVA	KW
Output				put 120 V, 60 Hz,			W/ Gun	Dimensions
			Voltage DC
				Single-Phase
								Length: 19-1/2 in.
90 A @ 19								(495 mm)
							79 lb	Width: 10-5/8 in.
Volts DC, 20%	25 − 140		28	20	2.84	2.41
							(36 kg)	(273 mm)
Duty Cycle
								Height: 12-3/8 in.
								(314 mm)
	Solid/Stain-	Flux Cored	Aluminum		Wire Feed Speed Range
	less
Wire Type
	.023 - .035 in.	.030 - .035 in.
And Diameter			.030 in.	60 − 740 IPM (1.5 − 18.8 m/min) At No Load
	(0.6 - 0.9	(0.8 - 0.9
			(0.8 mm)	40 − 600 IPM (1.0 − 15.2 m/min) Feeding Wire
	mm)	mm)

OM-249 498 Page 12