Hobart Welding Products 210 MVP Multi−Voltage Plug MVP Connection, Connecting Plug To Power Cord

5-9. Multi−Voltage Plug (MVP) Connection

3

5

7

Selecting Plug

2

4

6

1

! Do not cut off power cord connector and rewire. The power cord connector and plugs will work with standard NEMA receptacles. Modifying power cord, connector, and plugs will void product warranty.

Connecting Plug To Power Cord

Selecting Plug

1Power Cord Connector From Welding Power Source

Select plug for power supply receptacle available at site. Not all plugs shown are provided as standard with unit.

2Plug − NEMA Type 5−15P

3Receptacle − NEMA Type 5−15R (Customer Supplied)

4Plug − NEMA Type 5−20P (Optional)

5Receptacle − NEMA Type 5−20R (Customer Supplied)

6Plug − NEMA Type 6−50P

7Receptacle − NEMA Type 6−50R (Customer Supplied)

! Follow electrical service guide for 230 VAC in Section 5-7. Do not use plug rating to size branch circuit protection.

MVP Plug1 2010−10 / Ref. 805 390-C

Connecting Plug To Power Cord

Align arrow on plug with arrow on power cord connector. Push together.

Tighten threaded collar. As threaded collar is tightened, push plug onto adapter until collar is completely tight.

Connect plug to receptacle.

OM-249 498 Page 20