5-3. Installing Work Clamp
.Connection hardware must be tightened with proper tools. Do not just
hand tighten hardware. A loose electrical connection will cause poor weld performance and excessive heating of the work clamp.
1Nut
2Work Cable From Unit
3Work Clamp
4Screw
5Work Clamp Tabs
Bend tabs around work cable.
6 Insulating Sleeves
Slide one insulating sleeve over work cable before connecting to clamp.
Slide insulating sleeves over handles.
1
6
2
3
5 | 4 |
Tools Needed:
7/16 in.
7/16 in.
802
