Corded Voyager 1450g

RS232 Serial Port Connection:

CCB01-010BT Base

RS232 Serial Port Connection:

Note: The power supply must be ordered separately, if needed.

3.If you are connecting a CCB01-010BT Base, make sure the cables are secured in the wireways in the bottom of the cordless base and the base sits flat on a horizontal surface.

4.Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port.

5.Once the scanner or cordless base has been fully connected, power up the computer.

This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.

Connecting with RS485

A scanner or cordless base can be connected for an IBM POS terminal interface. 1. Connect the appropriate interface cable to the device, then to the computer.

1 - 4