Operation

1.Press SPOT on the front panel or remote control, then select one of four Spot Monitors.

2.Select the camera to be displayed on the Spot Monitor.

Figure 4-6 Spot Monitor Menu

If you want to display more than one camera on a Spot Monitor, you can display them sequentially:

1.In the Spot Monitor selection mode, press SEQUENCE on the front panel or remote control, or select Sequence On from the menu to start displaying cameras sequentially.

2.Press SEQUENCE or select Sequence On again to stop sequencing on the Spot Monitor.

Any cameras that are Off, have lost video or are set to Covert (unless the user has authority to view covert cameras) will be excluded from the sequence.

Figure 4-7 Sequence Menu

The Spot Monitor 1 supports multi-view formats and displays live video using the same settings as the main monitor.

When the Spot Monitor is in the sequence mode, you can set the camera’s display dwell time. Refer to Display Screen on page 66 for details.

102