Configuration

12.Highlight the second box beside Temperature Threshold, and press . Select either °C (Celsius) or °F (Fahrenheit), and press .

Note The box beside Last Check-Timedisplays the Date and Time of the last S.M.A.R.T. check.

13.Highlight OK, and press to accept the changes. Selecting Cancel exits the screen without saving the changes.

14.Highlight the Actions tab and the System Event Actions screen (Figure 3-79) displays.

Figure 3-79 System Event Actions Screen

The DVR can be setup to react to system events. System events can be associated with an Alarm-Out connector, sound the DVR’s internal buzzer, and/or notify a number of different devices.

15.Highlight the Alarm-Outbox beside the desired event (Check Recording, Check Alarm-In, Disk Almost Full, Disk Full, Disk Bad, Disk Temperature, or Disk S.M.A.R.T.), and press . A list of Alarm Outputs appears. You can associate as many Alarm-Outs with the Event as you wish. If the DVR detects that event, it triggers output signals on all the associated Alarm-Out connectors. You can also have the DVR’s internal buzzer sound if an event is detected.

Note

Alarm-Outaction cannot be set to System and Panic Record

 

events.

 

 

16.Highlight the Notify box beside the desired event and press . You can toggle the entire list On and Off by highlighting Notification and pressing . You can toggle the individual items On and Off by highlighting that item and pressing .

Highlight OK and press to accept your changes.

92