Configuration

Figure 3-25 LAN (Manual) Setup Screen

2.Highlight the box beside Type and press . You can select the type of network configuration from: Manual, DHCP and ADSL (with PPPoE). Select the desired type and press .

3.Selecting Manual as the Type allows you to set up LAN parameters manually.

Note You will need to get the appropriate IP Address, Gateway and

Subnet Mask values from your network administrator.

a.Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number.

The factory default LAN settings are:

IP Address:

192.168.1.129

Gateway:192.168.1.254

Subnet Mask:

255.255.255.0

b.Highlight the box beside DNS Server. Press the Up and Down arrow buttons to set the IP address of the DNS server.

c.Highlight the Port Number Setup… box and press . The Port Number Setup screen (Figure 3-26) appears.

Note You will need to get the appropriate Port Numbers for each RAS and WebGuard related program (Admin, Callback, Watch and Search) from your network administrator.

Document 900.0856 Rev 3.00

53

11/07