Configuration

2.Highlight the Site box and press . A virtual keyboard appears that you can use to enter a Site Name.

3.Once you have entered your title, highlight OK and press .

4.Highlight the box beside System ID and press . Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number from 0 to 99.

Note The System ID number is used to identify the unit when it is connected with other DVRs through the RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485 network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as they are not part of an RS485 network. If this is the case, all will be controlled at the same time when using the infrared remote control.

5.Highlight the box beside Language and press . A drop-down menu displays the available languages. Highlight the desired language and press .

6.The box beside Version displays the software version of the DVR. To upgrade the software:

a.Connect a USB device containing the upgrade package file to the DVR.

b.Highlight Upgrade… and press . The Upgrade screen appears. The screen displays the upgrade package file names that are available. The .rui indicates that the file is for software upgrades.

c.Select the desired file and press .

d.Highlighting Install and pressing will install the selected software package. Highlighting Cancel and pressing will close the window without upgrading the software.

If the upgrade package file is not installed on the DVR properly, you will get an error message.

e.The system restarts automatically after completing the upgrade.

Figure 3-7 Upgrade Screen

Note

Upgrade will be deactivated if the hard disk drive has not been

 

formatted as it requires the space for temporary files when

 

upgrading the system.

 

 

40