Configuration

7.Highlight the box under the Channels heading and press to select which cameras will be recorded.

8.Highlight the box under the Settings heading and press to define the recording settings. You can set the ips and Quality of the recording for any modes you set up in the Mode column. If you do not set the ips and Quality in the Settings column, the DVR will follow the default settings. See Figure 3-51for details.

9.Highlight the box under the heading and press to delete the recording settings. You will be asked to confirm that you want to delete the settings.

10.Highlight Default… and press . The Default screen appears.

Figure 3-51 Default Setup Screen

11.Highlighting boxes under ips and pressing allows you to set the images per second for Time and Event recording. You can select from 0.10 to 30.00 images per second.

12.Highlighting boxes under Quality and pressing allows you to set the recorded image quality for Time and Event recording. You can select from: Very High, High, Standard and Low.

13.You can save your changes by highlighting Save and pressing . Selecting Cancel exits the screen without saving the changes.

Pre-Event Screen

1.Highlight Pre-Eventin the Record menu and press , and the Pre-Event setup screen (Figure 3-52) appears. If you do not have Event set up in the Record Schedule, a message will display alerting you to this fact.

Figure 3-52 Pre-Event Setup Screen

Document 900.0856 Rev 3.00

73

11/07