Configuration

10.Highlight the box beside Daytime and press . Use the Up and Down arrow buttons to set the Daytime range. The DVR will consider the remaining time range as the Nighttime.

11.Highlight the Actions 1 and Actions 2 tabs and the Motion Detection Actions 1 (Figure 3-65) and Actions 2 (Figure 3-66) screens display.

Figure 3-65 Motion Detection Actions 1 Screen

The DVR can be set to react to motion detection differently for each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector, sound the DVR’s internal buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or display a camera on a SPOT monitor.

Note You can associate multiple cameras with a camera that detects motion.

12.Highlight the box under the Record heading and press . A list of cameras appears. You can associate as many cameras with that camera as you wish. If the DVR detects motion on the selected camera, it starts recording video from all the associated cameras.

Note For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.

13.Highlight the box under the Alarm-Outheading and press . A list of Alarm Outputs appears. You can associate as many Alarm-Outs with that camera as you wish. When the DVR detects motion on the selected camera’s input, it triggers output signals on all the associated Alarm-Out connectors. You can also have the DVR’s internal buzzer sound if motion is detected on the selected camera.

Document 900.0856 Rev 3.00

81

11/07