Bluetooth Beep and LED Indications
Beep Type from Bluetooth DeviceBehavior

 

 

Acknowledge label

1 beep

 

 

Label rejected

2 beeps at low frequency

 

 

Transmission error

Beep will sound high-low-high-low

 

 

Link successful

Beep will sound low-medium-high

 

 

Link unsuccessful

Beep will sound high-low-high-low

 

 

LED on Bluetooth Device

Behavior

 

 

Yellow LED blinks at 2 Hz

Linking in progress

 

 

Off

Disconnected or unlinked

 

 

Yellow LED blinks at 50 Hz

Bluetooth transmission in progress

 

 

Yellow LED blinks at the same rate as the paging beep (1 Hz)

Paging

 

 

Green LED blinks once a second

Disabled indication

 

 

Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated.

Bluetooth Printer Setup

The Bluetooth managed device should be as close as possible, in direct line of sight, with the MX3Plus during the pairing process.

1.Open the LXEZ Pairing Panel.

2.Tap Discover. Locate the Bluetooth printer in the Discovery panel.

3.Tap and hold the stylus (or doubletap) on the Bluetooth printer ID until the right-mouse-click menu appears.

4.Select Pair as Printer to pair the MX3Plus with the Bluetooth managed printer.

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.

Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on the manufacturer’s web site. Contact Technical Assistance for Bluetooth product assistance.

Note: If there is no beep or no LED flash from the Bluetooth managed printer, the MX3Plus and the printer are currently paired.

4-71