The options for the TX Diversity parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration | TX Diversity |
|
|
A Main and BG Main | Main Only |
|
|
A Main and A Aux | On |
|
|
BG Main and BG Aux | On |
|
|
A Main only | Main Only |
|
|
BG Main only | Main Only |
|
|
Contact Technical Assistance if you have questions about the antenna(s) installed on your MX3Plus.
Parameter | Default | Function | |
|
|
| |
| BG: | How to handle antenna diversity when receiving packets from the Access Point. | |
RX | Options are: Main Only (use the main antenna only), Aux Only (use the auxiliary antenna | ||
on Main | |||
Diversity | only), | ||
A: Main Only | |||
| the auxiliary antenna). | ||
|
| ||
|
|
|
The options for the RX Diversity parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration | RX Diversity |
|
|
A Main and BG Main | Main Only |
|
|
A Main and A Aux | |
|
|
BG Main and BG Aux | |
|
|
A Main only | Main Only |
|
|
BG Main only | Main Only |
|
|
Contact Technical Assistance if you have questions about the antenna(s) installed on your MX3Plus.
Parameter | Default | Function | |
|
|
| |
|
| If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold, the | |
Frag | 2346 | packet is fragmented (sent as several pieces instead of as one block). Use a low setting in areas | |
Thresh | where communication is poor or where there is a great deal of wireless interference. | ||
| |||
|
| Options are: Any number between 256 bytes and 2346 bytes. | |
|
|
| |
|
| If the packet size exceeds the specified number of bytes set in the Request to Send (RTS) threshold, | |
RTS | 2347 | an RTS is sent before sending the packet. A low RTS threshold setting can be useful in areas where | |
Thresh | many client devices are associating with the Access Point. | ||
| |||
|
| Options are: Any number between 0 and 2347. | |
|
|
| |
|
| The LED on the wireless card is not visible to the user when the wireless card is installed in a sealed | |
LED | Off | mobile device. | |
|
| Options are: On, Off. | |
|
|
| |
Tray Icon | On | Determines if the Summit icon is displayed in the System tray. | |
Options are: On, Off | |||
|
| ||
|
|
| |
Hide |
| When On, the Summit Config Utility masks passwords (characters on the screen are displayed as an | |
On | *) as they are typed and when they are viewed. When Off, password characters are not masked. | ||
Password | |||
Options are: On, Off. | |||
|
| ||
|
|
|