EAP-TLS

To use EAP-TLS, make sure the following profile options are used.

•Enter the SSID of the Access Point assigned to this profile

•Set EAP Type to EAP-TLS

•Set Encryption to WPA TKIP

•Set Auth Type to Open

To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as detailed in this section.

See Sign-On vs. Stored Credentials for information on entering credentials.

Click the Credentials button.

•No entries except the User Certificate Filename and the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for the User Name and Password when connecting to the network.

•For Stored Credentials, User, Password and the CA Certificate Filename must be entered.

Enter these items as directed below.

Enter the Domain\Username (if the Domain is required), otherwise enter the Username.

Select a user certificate from the Windows certificate store. Use the Browse button to locate the User Cert from the certificate store. Highlight the desired certificate and press the Select button. The name of the certificate is displayed in the User Cert box.

6-36