RFTerm (Optional)Start > Programs > RFTerm

Installed by Honeywell. The application can also be accessed by double clicking the RFTerm desktop icon.

Avalanche

The Wavelink Avalanche Enabler installation file is pre-loaded on the MX3Plus; however, the device is not configured to launch the installation file automatically. The installation application must be run manually the first time Avalanche is used. Following installation, the Wavelink Avalanche Enabler will be an auto-launch application. This behavior can be modified by accessing the Avalanche Update Settings panel through the Enabler Interface.

Software Development

The CE API Programming Guide documents Honeywell-API calls for the MX3Plus. It is intended as an addition to Microsoft Windows CE API documentation.

A Software Developers Kit (SDK) and additional information about software development can be found on the Developer Portal. Contact Technical Assistance for more information.

Access Files on the SD/CF Card

Click the My Device icon on the Desktop then click the System icon.

A SD/CF card is used for permanent storage of the MX3Plus drivers, CAB files and utilities. It is also used for registry content back up.

CAB files, when executed, are not deleted.

Note: Always perform a warm reset (Start / Run / Warmboot) when exchanging one flash card for another.

4-6