Avalanche Update using File > Settings

Use these menu options to setup the Avalanche Enabler on the MX3Plus. Change settings and then save the changes (reboot) before connecting to the network.

Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center User’s Guide for details).

Menu Options

Note: Your MX3Plus screen display may not be exactly as shown in the following menu options. Contact Technical Assistance for version information and upgrade availability.

Connection

Enter the IP Address or host name of the Mobile Device Server. Set the order in which serial ports or

RF connections are used to check for the presence of the Mobile Device Server.

 

 

 

Server Contact

Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot settings.

 

 

Data

Control when data is transferred between the device and the Mobile Device Server.

 

 

Preferences

Set options for Enabler startup or shutdown and logging. If the Preferences tab is not present, you

may have an older version of the Enabler with the Startup/Shutdown tab.

 

 

 

Display

Set up the Windows display at startup, on connect and during normal mode. The settings can be

adjusted by the user.

 

 

 

Taskbar

Set options for Taskbar.

 

 

Execution

Not available in this release. AppLock is recommended for this task.

 

 

Scan Config

This option allows the user to configure Enabler settings using a special bar code that is created by

the Avalanche MC Console. Scan Config not currently supported.

 

 

 

Startup/Shutdown

Set options for Enabler program startup or shutdown.

 

 

Shortcuts

Add, delete and update shortcuts to user-allowable applications.

 

 

SaaS

Configure the Enabler to connect with Avalanche on Demand.

 

 

Adapters

Enable or disable network and wireless settings. Select an adapter and switch between the

Avalanche Network Profile and manual settings.

 

 

 

Status

View the current adapter signal strength and quality, IP address, MAC address, SSID, BSSID and

Link speed. The user cannot edit this information.

 

 

 

5-7