Connect
Connect the modem cable to the PC (the host) and the mobile device (the client). Select “Connect” from the Start Menu on the mobile device (Start > Programs > Communications > Connect).
Note: | Run “Connect” when the “Get Connected” wizard on the host PC is checking COM ports to establish a connection for |
| the first time. |
Note: | USB synchronization will start automatically when the cable is connected, not requiring you to select “Connect” from |
| the Start menu. |
Disconnect
USB Connection•Disconnect the cable from the mobile device.
•Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.
IMPORTANT – Do not put the mobile device into Suspend while connected via USB. The device will be unable to connect to the host PC when it resumes operation.
Serial Connection•Disconnect the cable from the mobile device.
•Put the mobile device into Suspend.
•Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.
Network Connection•Put the mobile device into Suspend.
•Tap the status bar icon in the lower right hand corner of the status bar. Then tap the Disconnect button.