Command
Command |
| Function | |
|
|
| |
options |
| Specifies the option to perform. See the table below for the option parameters and values. | |
|
|
| |
load |
| Loads and starts Netlog. | |
|
|
| |
start |
| Starts the Netlog process of logging the network traffic. | |
|
|
| |
stop |
| Stops Netlog from logging network traffic. | |
|
|
| |
unload |
| Unloads Netlog. | |
|
|
| |
Options |
|
| |
|
| ||
Options | Function | ||
|
| ||
pkt_size in | Specifies the maximum packet size captured in bytes. This option should only be run after you have called load | ||
bytes | and stop. Default is 5000. | ||
|
| ||
cap_size in | Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only be run after you | ||
bytes | have called load and stop. Default is 500,000. | ||
|
| ||
.cap file | Specifies the name of the file to which network traffic information is saved. This option should only be run after | ||
you have called load and stop. Default is \netlog. | |||
| |||
|
|
| |
| Run cmd |
|
| |
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
Select load from the Commands list and click the Run cmd button.
Select stop from the Commands list and click the Run cmd button.
Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd button.