| Folder | Description | Preserved upon Reboot? |
|
|
|
Application Data | Data saved by running applications | No |
|
|
|
My Documents | Storage for downloaded files / applications | No |
|
|
|
Network | Mounted network drive | No |
|
|
|
Program Files | Applications | No |
|
|
|
System | Internal SD Flash Card (CAB file storage) | Yes |
|
|
|
Storage Card or SD Card | Additional optional storage space | Yes |
|
|
|
Temp | Location for temporary files | No |
|
|
|
Windows | Operating System in Secure Storage | No |
|
|
|
Note: If the user is NOT using Wavelink Avalanche to manage their mobile device, the Enabler should not be installed on the mobile device(s).
The following features are supported by the Wavelink Avalanche Enabler when used in conjunction with the Avalanche Manager.
After configuration, Enabler files are installed upon initial bootup and after a hard reset. Network parameter configuration is supported for:
•IP address: DHCP or static IP
•RF network SSID
•DNS hosts (primary, secondary, tertiary)
•Subnet mask
•Enabler update
Related Manual: Using Wavelink Avalanche on Windows Computers
The MX3Plus has the Avalanche Enabler installation files loaded, but not installed, on the mobile device when it is shipped. The installation files are located in the System folder on CE devices. The installation application must be run manually the first time Avalanche is used.
After the installation application is manually run, a reboot is necessary for the Enabler to begin normal performance. Following this reboot, the Enabler will by default be an
The designation of the mobile device to the Avalanche CE Manager is LXE_MX3X.
CE devices manufactured before October 2006 must have their drivers and system files upgraded before they can use the Avalanche Enabler functions. Contact Technical Assistance for details on upgrading the mobile device baseline.