Honeywell Q7055A user manual

Honeywell

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

Q7055A

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

INSTALLATION INSTRUCTION & USER MANUAL

Quick Setup

In order to setup the BNA device properly, the following connections are prerequisite:

•Null-Modem cable connected to a PC running a VT100 terminal emulation program or a VT100 compatible terminal (refer to Table 6-1: Terminal settings)

•LAN connection either via UTP (RJ45 connector) or AUI.

•Power connection.

•An active FTP-Server machine on the LAN

The following BNA Bootloader commands are mandatory for setting up the BNA (for a detailed command description, refer to chapter 6.5 Command Description on Page

31):

np	Basic network parameters
dc	Download configuration
load	Load executable from FTP server

Before the application firmware is started it is recommended to add some users (user roles) using command um (refer to chapter 6.5.8 um - User management on Page 37).

After that the BNA device can be installed at its final operating location.