BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
piece of equipment on the network is connected to a central hub. The wiring is connected to devices using a plug that resembles a phone jack, called RJ45.
Pin Number | Signal Name |
|
|
1 | Transmit (TX) + |
|
|
2 | Transmit (TX) - |
|
|
3 | Receive (RCV) + |
|
|
4 | Reserved |
|
|
5 | Reserved |
|
|
6 | Receive (RCV) - |
|
|
7 | Reserved |
|
|
8 | Reserved |
|
|
Table
7.2.1.1 Connecting a BNA to a Hub
For connecting a BNA device to a LAN via an Ethernet Hub the required cable should be configured as shown in Figure
45 |
