BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
2 Location of Parts and Controls
The numbering for the parts and controls in this section is referring to the pictures on the rear side of the title page. In order to have a reference between the numbering here and the device pictures, it is possible to fold this page out.
2.1Front Side
Differences between the various BNA types are explicitly noted in the concerning element description.
1Reset
Hardware reset button. Located directly behind the small hole in the front panel. To reach this button, a pointed object like a sharp pen or an unfolded paper clip is necessary. Pressing this button resets the BNA device immediately. This operation is similar to power on the BNA device.
2Mode
Mode switch button. This button is needed to change the bootloader modes. For a detailed description about BNA operation modes, please refer to chapter 6.2 Operating Modes on Page 25.
3LAN
Local Area Network (LAN) activity display.
8 |
