Honeywell Q7055A user manual Help or ?, Np Basic network parameters

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

Text Text written with this font shows terminal output.

Note : All BNA Bootloader commands are case- sensitive!

6.5.1Help or ?

Entering help or ? at the BNA bootloader> prompt followed by <Enter> displays all available BNA Bootloader commands.

In each sub-shell help or ? can also be used to view the existing commands.

All command lists can vary between different users. The lists don’t show any commands which a user is not allowed to execute.

6.5.2np - Basic network parameters

The basic network parameters command np is used to define the IP address, the network mask, and the default gateway of the BNA device. This information is normally provided by the local IS department.

np is not a direct command; instead, it provides a sub-shell with the following commands:

display displays current basic network settings.

modify changes basic network settings. After entering this command each basic network parameter will be queried

32 EN1B-0198GE51 R0801