Honeywell Q7055A user manual CA UT I on

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

CA UT I ON:

Using not-allowed IP-Addresses could cause interference on the network.

Please contact your network administrator to retrieve a unique IP-Address. In case you want to connect the BNA to a customer network make sure to get in touch with the customers IT manager to retrieve this IP-Address information.

dc	Download configuration
	Definition of FTP server, path to
	firmware and user account on FTP
	server. This is necessary for loading the
	application firmware into the BNA
	device.
load	Load executable from FTP server
	This command finally loads the
	application firmware	(executable) into
	the BNA device.	After successful
	download, the application firmware is
	moved into the Flash memory.

This is the minimum command sequence for setting up a BNA device.

After that the application firmware can be invoked by entering the command run or by pushing the Reset button. When the Reset button is pushed, the BNA Bootloader behaves as depicted in Figure 6-1 on Page 24.

30 EN1B-0198GE51 R0801