BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
6.5.5ping - ping
Sends an ICMP Ping through TCP/IP to the FTP- Server defined in the download configuration or to the machine addressed by the
This command can be used to check whether the network connection is working properly.
6.5.6ver - Show installed software
The command ver outputs a list of all installed software components on the current BNA device.
6.5.7run - Execute installed software
The command run starts a
If no application firmware could be found, then the information No executable found is printed out. In this case, use load to download an application firmware.
6.5.8um - User management
The user management command um allows the definition of users, different access rights per user and user individual password settings.
User definitions are necessary to provide a secure device on an open TCP/IP network. Furthermore it
37 |
