Honeywell Q7055A user manual FAQs

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

FAQs

1.Which terminal type can be used for connecting to the BNA Bootloader?

For connecting to the BNA Bootloader, any VT100 compatible terminal or VT100 compatible terminal emulation program can be used. For the proper terminal settings, please refer to chapter 6.4 Device Setup on Page 28.

2.After power-on or reset, the BNA device does not show the BNA bootloader menu on my terminal. How do I get the correct display?

One reason could be that the terminal settings are not correct. Please verify the actual terminal settings. For the proper terminal settings please refer to chapter 6.4 Device Setup on Page 28.

A second reason could be that an application firmware is already running in your BNA. As described in chapter 6.1 Startup Behavior on Page 23 BNA will start an application firmware automatically after power-on or reset. To access bootloader mode, it is required to switch the

operating mode to force the BNA to Stay in Bootloader Mode. Please refer to chapter

6.3Switching the Operating Mode on Page 25 for further information.

50 EN1B-0198GE51 R0801