Honeywell Q7055A user manual Parameters may be wrong is acceptable, Load Load executable

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

the parameters may be wrong is acceptable.

exit exits the sub-shell and returns to the main shell.

6.5.4load - Load executable

The command load is a direct command which immediately starts downloading the application firmware image into the BNA based on the download configuration defined by the command dc.

After loading the image into local memory the BNA Bootloader starts copying the image into the local Flash memory where it resides until updated the next time.

load accepts optional command-line parameters. Accepted command-line parameters are FTP-ServerIP-Addressand/or filename. Command-line parameters supersede the current download configuration for these elements. Command-line parameters in the load command scope can be used to use an alternative FTP-Server for downloading or to download another application firmware image into the BNA device.

If load fails, then it needs to be checked whether the correct download configuration has been defined. In this case, the command dc test becomes useful.

36 EN1B-0198GE51 R0801