Hoshizaki F-300BAF service manual Other, Problem, Possible Cause, Remedy

Models: F-300BAF

1 50
Download 50 pages 52.19 Kb
Page 32
Image 32

3. Other

Problem

Possible Cause

 

Remedy

 

 

 

 

[1] Abnormal noise

a)Fan Motor

1. Bearing worn out.

1. Replace.

 

 

 

 

 

 

2. Fan blade deformed.

2. Replace fan blade.

 

 

 

 

 

 

3. Fan blade does not

3. Replace.

 

 

move freely.

 

 

 

 

 

 

b)Compressor

1. Bearings worn out, or

1. Replace.

 

 

cylinder valve broken.

 

 

 

 

 

 

 

2. Mounting pad out of

2. Reinstall.

 

 

position.

 

 

 

 

 

 

c) Refrigerant Lines

1. Rub or touch lines or

1. Replace or separate.

 

 

other surfaces.

 

 

 

 

 

 

d)Gear Motor

1. Bearing or gear worn

1. Replace.

 

 

out / damaged.

 

 

 

 

 

 

e)Evaporator

1. Low refrigerant

1. Check charge, check for

 

 

pressures.

possible leak, repair,

 

 

 

re-charge.

 

 

 

 

 

 

2. Expansion valve bad.

2. Replace.

 

 

 

 

 

 

3. Evaporator bad.

3. Replace.

 

 

 

 

 

 

4. Scale on inside wall of

4. Use "SCALE AWAY" or

 

 

freezing cylinder.

"LIME-A-WAY" solution to

 

 

 

clean periodically. If the

 

 

 

water is found hard by

 

 

 

testing, install a softener.

 

 

 

 

[2] Overflow from

a)Water Supply

1. Water pressure too

1. Install a pressure reducing

reservoir (water does

 

high.

valve.

not stop).

 

 

 

b)Water Valve

1. Diaphragm does not

1. Clean or replace.

 

 

 

close.

 

 

 

 

 

 

c) Float Switch

1. Bad contacts.

1. Check for continuity and

 

 

 

replace.

 

 

 

 

 

d)Water Control Relay

1. Bad contacts.

1. Replace

 

 

 

 

[3] Gear motor protector

a)Power Supply Voltage

1. Too high or too low.

1. Connect the unit to a

operates frequently or

 

 

power supply of proper

fuse blows frequently.

 

 

voltage.

 

 

 

 

 

b)Evaporator Assembly

1. Bearings or auger

1. Replace bearings or

 

 

worn out.

auger.

 

 

 

 

 

c) Bin Control

1. Bad contacts.

1. Check for continuity and

 

 

 

replace.

 

 

 

 

 

 

2. Actuator does not

2. Clean shaft and its

 

 

move freely.

corresponding holes or

 

 

 

replace bin control.

 

 

 

 

32

Page 32
Image 32
Hoshizaki F-300BAF service manual Other, Problem, Possible Cause, Remedy