21 | Total Operation Cycles Before | 10 to 990 cycles | 1 to 99 | 2 |
| Alert |
|
| (20 cycles) |
22 | Display Hold Function | ON: stays on | on or oF | oF |
|
| OFF: goes off after 10 minutes |
|
|
23 | Power Supply Lock Function | ON: "Ch" keeps flashing until | on or oF | oF |
|
| electrode is turned off |
|
|
|
| OFF: "Ch" goes off when "ON/ |
|
|
|
| OFF" button is switched off |
|
|
24 | N/A |
|
|
|
25 | N/A |
|
|
|
26 | Error Log | NA | Most Recent | NA |
through |
|
| Errors |
|
30 | Note: To erase the log, press |
| 26 is most |
|
| and hold the up and down |
| recent. |
|
| buttons for 3 seconds with one |
|
| |
| of the error codes displayed. |
| if the log is |
|
| The unit beeps once and the |
| empty. |
|
| entire log clears. |
|
|
|
8. Temperature Display
•Indicates the average water temperature read by the wash tank or internal booster tank thermistor. Indicates wash tank water temperature in wash cycle, rinse (internal booster tank) water temperature in rinse cycle. Press the down button to indicate rinse (internal booster tank) water temperature instead of wash tank water temperature while the dishwasher is in "READY" mode. To change the normal temperature display to the rinse (internal booster tank) water temperature, see "Water Temperature Display" (service menu item 12) in "II. D.7.b) Service Menu Chart."
•The temperature display range is 32°F to 199°F (0°C to 99°C). To change the display scale, see "Temperature Display Scale" (service menu item 13) in "II.D.7.b) Service Menu Chart."
•The temperature display updates every 30 seconds for the wash tank and every 5 seconds for the internal booster tank.
22
