G. Removal and Replacement of Door
To remove:
1)Open the door. Remove the lower screws securing the roller units from inside the wash compartment, then loosen the upper screws. CAUTION! Never remove the upper screws, or the roller units will fall into the rails, and the door cannot be removed. If the roller units should fall into the rails, use a piece of sheet metal with a hooked end or a wire (2 mm dia) with a
2)Remove the water guard (secured with the lower roller unit mounting screws).
3)Remove the handle. WARNING! To reduce the risk of injury, follow the instructions in “IV.F. Removal and Replacement of Handle.”
4)Lift off the door.
To replace:
1)Fit the roller units into the rails with the upper mounting screws held in place.
2)Position the door into the rails, and fit the door into place. The roller unit and screw positions should be aligned.
3)Attach the handle.
4)Open the door, reinstall the water guard, and screw the roller units from inside the wash compartment.
5)Check the door for proper movement.
55
