j) Phase Reversal Error (H7)

If a phase reversal error is detected, the unit shuts down, "H7" appears in the display, and the buzzer sounds.

After correcting the connection, the alarm resets.

See the chart below for possible causes and remedies.

Code

H 7

Error

Power supply phase is reversed.

Item

Electrical Connection

Possible Case

Connected in wrong positions.

Operation

Unit stops.

Remedy

Swap two of three wires at power switch (GFCI) connection.

38

Page 43
Image 43
Hoshizaki JWE-620UA-6B service manual Phase Reversal Error H7