Inserting an ExpressCard

CAUTION: To prevent damage to the computer and external media cards, do not insert a PC Card into an ExpressCard slot.

CAUTION: To reduce the risk of damage to the connectors: Use minimal force when inserting an ExpressCard.

Do not move or transport the computer when an ExpressCard is in use. NOTE: The following illustration may look slightly different than your device.

The ExpressCard slot may contain a protective insert. To remove the insert:

1.Press in on the insert (1) to unlock it.

2.Pull the insert out of the slot (2).

To insert an ExpressCard:

1.Hold the card label-side up, with the connectors facing the computer.

2.Insert the card into the ExpressCard slot, and then press in on the card until it is firmly seated.

You will hear a sound when the card has been detected, and a menu of options may be displayed.

NOTE: The first time you connect an ExpressCard, a message in the notification area, at the far right of the taskbar, lets you know that the card is recognized by the computer.

NOTE: To conserve power, stop or remove an ExpressCard when it is not in use.

52 Chapter 7 External cards and devices

Page 62
Image 62
HP 14' B8V06UT#ABA manual Inserting an ExpressCard