Optical drive
NOTE: The optical drive is an optional feature and is available only on computer models equipped with a low voltage
Description | Spare part number |
|
|
DVD±RW and | |
|
|
|
|
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 44).
5.Remove the memory module compartment cover (see Expansion memory module on page 48). Remove the optical drive:
1.Position the computer with the right side toward you.
2.Remove the two Phillips PM2.0×5.0 screws that secure the optical drive to the computer.
3.Insert a
Component replacement procedures 59
