Display assembly
Description | Spare part number |
|
|
webcam (includes display panel cable, WLAN antenna transceivers and cables, and WWAN |
|
antenna transceivers and cables. |
|
|
|
with a webcam (includes display panel cable, WLAN antenna transceivers and cables, and WWAN |
|
antenna transceivers and cables. |
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 44).
5.Remove the memory module compartment cover (see Expansion memory module on page 48).
6.Remove the wireless module compartment cover (see WLAN module on page 53).
7.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 53) and the WWAN module (see WWAN module on page 57).
8.Remove the switch cover and keyboard (see Switch cover and keyboard on page 65). Remove the display assembly:
1.Close the computer and turn it upside down, with the rear panel toward you.
2.Remove the two rubber screw covers (1) and the two Torx T8M2.0×6.0 screws (2) from the bottom of the base enclosure.
3.Remove the two Torx T8M2.0×6.0 screws (3) from the rear panel.
4.Turn the computer
72 Chapter 4 Removal and replacement procedures
