c.Remove the display bezel (4). The display bezel is available using spare part numbers 598770-001 (for use only with computer models equipped with a webcam) and 598771-001 (for use only with computer models not equipped with a webcam).

13.If it is necessary to replace the ambient light sensor board:

a.Release the ZIF connector to which the ambient light sensor board is connected, and then disconnect the cable (1) from the board.

b.Remove the Torx T8M2.0×3.0 screw (2) that secures the ambient light sensor board to the display enclosure.

Component replacement procedures 77