HP 2540p WZ226UT#ABA manual Low-voltage hard drive or solid-state drive

Low-voltage hard drive or solid-state drive

NOTE: The 4.57-cm(1.80-in) hard drive and solid-state drive spare part kit includes a hard drive or solid-state drive bracket.

Description	Spare part number
4.57-cm(1.80-in), 320-GB, 5400-rpm hard drive	614537-001
4.57-cm(1.80-in), 250-GB, 5400-rpm hard drive	598778-001
4.57-cm(1.80-in), 160-GB, 5400-rpm hard drive	598777-001
4.57-cm(1.80-in), 160-GB, solid-state drive	598782-001
4.57-cm(1.80-in), 80-GB, solid-state drive	602675-001

Before removing the low-voltage hard drive or solid-state drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 44).

5.Remove the memory module compartment cover (see Expansion memory module on page 48). Remove the low-voltage hard drive or solid-state drive:

1.Position the computer with the front toward you.

2.Loosen the 2 captive screws (1) that secure the hard drive shield to the computer.

50 Chapter 4 Removal and replacement procedures