7.Remove the card reader board (2) and cable.
Reverse this procedure to install the card reader board, cable, and bracket.
Speaker
Description | Spare part number |
|
|
Speaker |
|
|
|
Before removing the speaker, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 44), and then remove the following components:
a.Memory module compartment cover (see Expansion memory module on page 48)
b.Wireless module compartment cover (see WLAN module on page 53)
c.Switch cover and keyboard (see Switch cover and keyboard on page 65)
d.Display assembly (see Display assembly on page 72)
e.Top cover (see Top cover on page 81)
86 Chapter 4 Removal and replacement procedures
