Card reader board
Description | Spare part number |
|
|
Card reader board (includes cable) | |
|
|
Card reader board bracket | |
|
|
Before removing the card reader board and bracket, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 44), and then remove the following components:
a.Memory module compartment cover (see Expansion memory module on page 48)
b.Wireless module compartment cover (see WLAN module on page 53)
c.Switch cover and keyboard (see Switch cover and keyboard on page 65)
d.Display assembly (see Display assembly on page 72)
e.Top cover (see Top cover on page 81)
Remove the card reader board and bracket:
1.Detach the card reader board cable (1) from the surface of the top cover (2). (The card reader board cable is attached to the top cover by
2.Turn the top cover upside down, with the front toward you.
84 Chapter 4 Removal and replacement procedures