HP 449298-001 AddressType, EthernetMAC, IScsiMAC, Add enet-connection MyNewProfile, Defined, Port

Item	Description
PXE	Enables or disabled PXE on the network connection. Valid values are
	enabled, disabled, and UseBios. If this value is not specified, the default
	is "UseBios."
	Only one connection can have PXE enabled per profile.
AddressType	The source of MAC address assignments to be used during the creation
	of the new connection. If not specified, the default is the domain default.
	If "User-Defined" is specified, then both an Ethernet MAC Address and
	iSCSI MAC Address must also be specified. Valid values include Vc-
	Defined, Factory-Default, and User-Defined.
EthernetMAC	The user-defined Ethernet MAC address to use for the connection. This
	property is required if the AddressType specified is "User-Defined."
iScsiMAC	The user-defined iSCSI MAC address to use for the connection. This
	property is required if the AddressType specified is "User-Defined."
Examples:
	->add enet-connection MyNewProfile
	Network=SomeNetwork
	Adds a new Ethernet network connection to a profile
	->add enet-connection MyNewProfile
	Network=SomeNetwork2 PXE=enabled
	Adds a new Ethernet network connection and enables PXE
	->add enet-connection MyNewProfile
	Adds a new Ethernet network connection and leaves the network
	unassigned
	->add enet-connection MyNewProfile
	AddressType=Factory-Default
	Adds a new Ethernet network connection and uses factory default
	addresses
	->add enet-connection MyNewProfile AddressType=Vc-
	Defined
	Adds a new Ethernet network connection using VC-defined addresses
	->add enet-connection MyNewProfile AddressType=User-
	Defined EthernetMAC=00-17-A4-77-00-00 iScsiMAC=00-
	17-A4-77-00-01
	Adds a new Ethernet network connection and provides user-defined
	MAC addresses

Item	Description
set enet-connection	Modify an existing server profile connection
Syntax	set enet-connection <ProfileName> <Port>
	[Network=<NetworkName>]
	[PXE=<enableddisabledUseBios>]
Parameters:
ProfileName	The name of the server profile that contains the connection to modify
Port	The port number of the connection being modified
Properties:
NetworkName	The name of the Ethernet network to associate with the connection.
	Applies to Ethernet network connections only.
	Command line 14