Item | Description |
|
|
| |
| Adds a new uplink port (Bay 1, Port 1) to a network |
|
|
| |
| Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed |
|
|
| |
| Adds a new uplink port (Bay 2, Port 3) to a shared uplink port set |
|
|
Item | Description |
|
|
remove uplinkport | Remove an uplink port element from a network or a shared uplink port set |
|
|
Syntax | remove uplinkport <PortID> [Network=<NetworkName> |
| UplinkSet=<UplinkSetName>] |
|
|
Parameters: |
|
|
|
PortID | The name of the port to remove from a network. (required). The port name must be in |
| the following format: |
| <EnclosureID>:<InterconnectBayNumber>:<PortNumber> |
| If EnclosureID is not specified, it defaults to the local enclosure. |
|
|
Network | The name of the network from which the port is removed |
|
|
UplinkSet | The name of the shared uplink port set from which the port is removed |
|
|
Examples: |
|
|
|
| |
| Removes a specific uplink port (Bay 1, Port 2) from a network |
|
|
| |
| Removes all uplink ports from a network named "BlueNetwork" |
|
|
| |
| Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set |
|
|
Item | Description |
|
|
set uplinkport | Modify an uplink port that exists as a member of a network or shared uplink port set |
|
|
Syntax | set uplinkport <PortID> [Network=<NetworkName> |
| UplinkSet=<UplinkSetName>] |
| Speed=<Auto10Mb100Mb1GbDisabled> |
|
|
Parameters: |
|
|
|
PortID | The name of the port to modify (required). The specified port must already be added |
| to a network or uplink port set. The port name is in the format: |
| <EnclosureID>:<BayNumber>:<PortNumber> |
|
|
Properties: |
|
|
|
Network | The name of the network to which the port belongs |
|
|
UplinkSet | The name of the shared uplink port set to which the port belongs |
|
|
Speed | Specifies the port speed for the port. Acceptable values include Auto, 10Mb, |
| 100Mb, 1Gb, and Disabled. |
|
|
Examples: |
|
|
|
| |
| Changes the port speed of a network port |
|
|
Command line 30