3 How to Install Accessories In Your PC
Installing Mass Storage Devices
8Align the drive with the holes in the bottom of the PC. Support the drive with your hand while securing the drive with the four screws provided.
9Support the power supply with your hand and very carefully return the PC to the upright position.
10Connect the data and power cables to the rear of the drive.
The connectors are shaped to fit one way only. If you are not sure which connector to use, refer to “Connecting an IDE Device to a Data Cable” on page 39.
Data cable | Power cable |
11If a device was removed from the middle shelf, replace it.
12If no device was removed from the middle shelf, replace the RFI bezel.
43