HP 5/xx 4 76

4 The HP Setup Program

After Installing an IDE Drive

When an Additional IDE Drive is installed

After installing an IDE drive you will need to run the Setup program to confirm that the drive has been detected by the PC.

1Switch on the PC.

2When F2=Setup is displayed, press to run the Setup program.

3From the “Configuration” menu, choose “Hard disk drive”.

4Select the disk you have just installed.

5Select Auto in the Type field.

6Select Autotype fixed disk and press

7Press to save your choice and exit Setup.

Refer to the operating system documentation for information about formatting a drive and installing the operating system.