Device feet

The device feet are adhesive-backed rubber pads. The rear feet are attached and the front feet are tethered to the bottom of the base enclosure.

NOTE: The front and rear device feet are not interchangeable. Due to the adhesive nature of the rubber pads, they should be replaced after removal.

NOTE: The rear device feet may not be applied on models that use the optional carrying handle (see Carrying handle on page 14).

Description

Spare part number

 

 

Rubber kit (contains 4 rubber device feet – 2 front and 2 rear)

578361-001

 

 

40 Chapter 4 Removal and replacement procedures