Memory module

Description

Spare part number

 

 

Memory module, PC2-6400, shared, 2048-MB

598858-001

NOTE: Not supported by computers with Windows® XP Home SP3, or with Windows 7 Starter

 

installed.

 

 

 

Memory module, PC2-6400, shared, 1024-MB

598861-001

 

 

Before removing the memory module, follow these steps:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device.

4.Remove the battery (see Battery on page 41).

5.If your device has WWAN capability, remove the SIM (see SIM on page 42).

Remove the memory module:

1.With the battery removed, slide the battery release latch in front of the memory module compartment (1) to release the memory module cover from the computer.

2.Swing the cover up and away from the outside of the computer to remove the cover (2).

3.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The module tilts up.)

Component replacement procedures 43