Mass storage devices

NOTE: Each hard drive spare part kit and solid state drive spare part kit includes a bracket and screws.

Description

Spare part number

 

 

Hard drive, 320-GB, 7200-RPM, for use with WWAN option

593643-001

 

 

Hard drive, 320-GB, 7200-RPM, SATA

577974-001

 

 

Hard drive, 250-GB, 7200-RPM, for use with WWAN option

593642-001

 

 

Hard drive, 250-GB, 7200-RPM, SATA

577973-001

 

 

Hard drive, 160-GB, 7200-RPM, for use with WWAN option

593641-001

 

 

Hard drive, 160-GB, 7200-RPM, SATA

577972-001

 

 

Solid state drive, 128-GB, SATA

606971-001

 

 

Solid state drive, 80-GB, SATA

583004-001

 

 

Before removing the hard drive or solid state drive, follow these steps:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device.

4.Remove the battery (see Battery on page 41).

5.If your device has WWAN capability, remove the SIM (see SIM on page 42).

6.Remove the keyboard (see Keyboard on page 45).

To remove the hard drive or the solid state drive:

1.Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws (2) that secure the drive assembly to the base enclosure.

48 Chapter 4 Removal and replacement procedures