Bluetooth module
Description | Spare part number |
|
|
Bluetooth module | |
|
|
Before removing the Bluetooth module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.
4.Remove the battery (see Battery on page 41).
5.If your device has WWAN capability, remove the SIM (see SIM on page 42).
6.Remove the following components:
a.Keyboard (see Keyboard on page 45)
b.Hard drive (see Mass storage devices on page 48)
c.Top cover (see Top cover on page 55)
Remove the Bluetooth module:
1.Disconnect the Bluetooth module cable (1).
2.Release the Bluetooth module from the adhesive pad to which it is affixed (2), and remove the Bluetooth module.
Reverse this procedure to install the Bluetooth module.
62 Chapter 4 Removal and replacement procedures