Remove the display assembly:
1.Disconnect the following cables and grounding tape from the system board and cable routing clips:
(1)Display panel cable
(2)Display panel cable grounding tape
(3)WLAN cables
(4)WWAN cables (select models only)
(5)Microphone cable
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other device components.
2.Remove the 2 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the device.
3.Remove the display assembly (2).
66 Chapter 4 Removal and replacement procedures