|
| |
|
|
|
| Message | Explanation and action |
|
| |
Possibly a paper jam | There may be paper jammed in the printer. (The printer has | |
1. | Open window | detected that a motor is blocked and the likely cause is a paper jam; |
2. | Switch power off | however, it may be due to some other cause.) |
3. | Clear paper path | Follow these steps to check the paper path, as described in Clearing |
4. | Switch power on | a paper jam. When the jammed paper has been cleared, you are |
5. | Align printheads | strongly recommended to align the printheads, as they are quite |
|
| likely to have become misaligned as a result of the paper jam. |
|
|
|
Printhead replacement not available now. Cancel print jobs before replacement
You have requested the printer to replace one or more printheads, but the printer is busy printing a job and cannot honor the request now.
Either: press the Cancel key to cancel the job that is currently printing, and then again select Replace Printheads (from the Ink system menu).
Or: wait until the job has finished printing (and there are no more jobs in the print queue), and then again select Replace Printheads (from the Ink system menu).
Printhead warning |
|
| A problem has occurred with one or more printheads. The | |||||||
Poor print quality |
|
| printheads are still functional. The problem was detected either | |||||||
|
|
|
|
|
|
|
|
|
| during printhead alignment or during troubleshooting. If you have |
|
|
|
|
|
|
|
|
|
| completed the routine, the system was unable to clean the |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| printheads fully. |
|
|
|
|
|
|
|
|
|
| You should use the Troubleshooting procedure to correct any print |
|
|
|
|
|
|
|
|
|
| quality problems that may be apparent; alternatively, you should |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| replace the printheads (see Printhead replacement). |
|
|
|
|
|
|
|
|
|
|
|
