Image is in one portion of the printing area
•Is the page size configured in the software too small?
•Are you sure that your software doesn’t believe the image to be in one quadrant of the page?
•Otherwise, this indicates an incompatibility between the software and the printer:
•Is your software configured for this printer? For general advice, see the Assembly and
Image is unexpectedly rotated
•Check the
•For an explanation of image rotation, see Rotating an image.
Print is distorted or unintelligible
•The interface cable between your computer and the printer could be faulty. Try another cable to see if the problem is corrected.
•If you have connected your computer to the parallel port on the printer, make sure you are using a genuine HP parallel interface cable.
•Depending on the software, drivers and RIPs you are using with your printer, there will be different solutions to this problem. Refer to the Vendor’s User Documentation for details.
One image overlays another on the same sheet
•The I/O Setup / I/O Timeout setting may be too long. From the